Yardian (with camera) Wi-Fi onboarding troubleshooting for iOS

iOS 14.2 issue

Unexpected Error

Sometimes you might see "unexpected error" at the end of the process. Please check the main LED on your Yardian. If it's stead green, please ignore the "unexpected error" message. The Wi-Fi onboarding process has been completed and your Yardian is online now.

Can not find my Yardian SSID in Wi-Fi Onboarding Step #1?

• Please make sure your Yardian is powered on and in Wi-Fi AP mode (LED blinking in Green and Blue).

• Please make sure you have the Wi-Fi dongle attached.

• Please make sure Wi-Fi is turned ON on your mobile device and connected to a 2.4G Wi-Fi network

• You might be too far away from Yardian's Wi-Fi signaling range
  
  

LED in Purple

If your Yardian is in Wi-Fi AP mode (LED blinking in Green and Blue) for more than 15 minutes, you will be asked to reboot Yardian by pressing Wi-Fi Reset Button until LED turns red.

Still failed to connect to my router

You can also use a USB drive to get your Yardian online.

Back to Wi-Fi Onboarding Troubleshooting